YET868pc-V2.0 Electric sliding door controller
Hi everyone,today I will introduce our YET868pc-v2.0 controller to you.This controller is improved from YET868pc controller.It is with more functions than the first version.Next I will introduce more details of YET868pc-v2.0 to you .
Yet868-v2.0 is a dedicated to the electric sliding door control controller, with the setting of travel, automatic delay closing, blocking stop, over-current detection, limit switch, soft start soft stop, adjustable torque and other functions; Different application control parameters can be set by digital display. This product is widely used in garage doors, supermarkets and other places.
Product specification parameters
Input voltage 220VAC
Working frequency :433MHZ or 315MHZ
Receive Sensitivity :433MHZ/315M HZ:-109 dbm
Remote control capacity :120 buttons (equivalent to 30 remotes@4-button)
Decoding :Learning code
Product function description
Power the controller, the buzzer will sound 2 times, then LED screen lights up and display
numbers 0-9 to start up it’s self-check. When a “.” shows up on the second LED screen,
the controller can go to work.
To learn the remote control, press the learn button for 3 seconds. After the point on the
second display should be turned off, the point on the first display should be turned on.
Then the mainboard should wait 10 seconds in order to transmit the code of the remote
control. When the code is captured, the buzzer emits 3 beeps and displays the number of
saved remote controls. The device then exits remote programming mode. If the code is
not captured during 10 seconds, the mainboard will exit the remote programming mode.
When the user presses and holds the learning key for 10 seconds. The motherboard
deletes all remote controls from memory. The buzzer rings for a long time
Overload protection shall be suitable for both situations (open or closed).
When the overload protection is triggered, the closing motor shall stop and then open
When the overload protection is triggered when it is opened, the motor shall only stop.
second display) and waits for the RF transmitter or signal input to trigger.
When the user presses and holds the set key for 10 seconds. mainboard restores the
factory default parameter settings. The buzzer rings for a long time.
Besides,there are still some functions for this controller.If you are interested in this products ,pls feel free to contact us to get more information.
Know more,click here！https://szyet.en.alibaba.com/?spm=a2700.775618.104.22.168f371d2x5q0bk
Focus on security technology innovation and lead the development of AI industry. The 17th China I...
On May 11, 2019, our company Yaoertai was founded 14th anniversary! In the past 14 years, we hav...
Saturday, the first week of work in 2019, On a sunny afternoon, Yaoertai, all business colleagues...
The 28th China (Beijing) International Building Decoration and Materials Expo will be held on Mar...
The 15th R + T Asia Shanghai Door and Window Sunshade Exhibition will be held from February 27th ...
The frequency used by the radio remote control is 433Mhz or 315Mhz, also referred to as 433 remot...
The infrared alarm can detect the infrared rays emitted by the human body, and is composed of an ...
Congratulation YET Global Sources Electronics Exhibition bring to a successful close Gate remote ...