YET611 reflective photocell sensor beam with mirror

YET611 is a our new arrival reflective photocell sensor with mirror and protective cap, it can support working volts AC/DC 12-24V, Normal open/Normal close can be choose by jumper. There are two lens for your option. One is imported lens and another one is domastic lens. Different lens with different working distance. Domastic lens can reach 10-12 meters working distance, and imported lens can be reach 15-18 meters working distance. The protective can anti sunlight and waterproof. We use red photocell case because if use black,it will effect the working distance.

Product Application: lifting doors, revolving doors, sliding doors, wall security protection, window and balcony security, warehouse security, parking lots and other outdoor security sites.

Product Installation & Note

1）Please install and test the product within Max. detect range.

2）Install the reflector in a suitable position and the reflector should face the sensor.

3）Adjust the position of sensor according to the reflector, and point the sensor to the center of the reflector. [In the initial installation and debugging, fixed the sensor firstly, the reflector is aligned with the sensor, and then move the reflector from near to far to the desired position.]

4）Do not power up the sensor until all electrical wiring of the sensor is complete.

• When debugging and installation, please pay attention to avoid the blind zone of the product [unable to sense obstacles in the blind zone]

Alibaba purchase link: https://www.alibaba.com/product-detail/YET611-Wireless-Infrared-Photocell-Sensor-with_62429477388.html?spm=a2747.manage.0.0.2aa471d25l3S23