2022 new arrival 2-in-one wireless remote control duplicator

Features:

1. Model number: YET2201
2. Duplicator version: D5 type
3. Frequency: 433mhz/315mhz
4. Copy method: face to face copy or back to back copy
5. Can copy Fixed code(1527,2240,2260,527,5326,etc) & Rolling code

Compatible with 18 rolling code brands (BFT,NICE,CAME,BENINCA,DOORHAN,FAAC,FANDINI,KEY,NOVA,PECCININ,ect)

6. battery included, 2 pcs CR2016 3V
7. . certificate: CE,ROHS
8. Package: white box
9. MOQ: 100 pcs

Advantages/reformation:

1. dual channels in one remote control duplicator

It means this duplicator has 2 channels let it be able to copy and save 2 pcs 4-buttons remote control at the same time,switching channel by pressing button 2 and button 3, different Led light color to distinguish different channel.

2. with a screen to check out channel set

Programming methods:

Copy remote controls just by one

Remain holding button 2 and 3 for more than 2 seconds, the LED flflashes in red (or blue), the duplicator is ready to copy another remote control ;

repeat holding button 2 and 3, the LED flflashes in blue( or red), the duplicator returns to the previous remote control. In a word, use button 2+3 to

switch between two remote controls you copied or want to copy. According to the LED color, red or blue, you can distinguish the remote controls

copied easily.

Fixed code remote control:

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flflashes means the

duplicating succeed.

Repeat above step to the rest buttons. The duplicator will work after duplicating.

Rolling code remote control:

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flflashes means the

duplicating succeed.

Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the

receiver.

YET2201 remote control duplicator Special programming steps for BFT MITTO2 & MITTO4 (old version)

1, memory clearance

2, Press and hold button 1 of duplicator till LED flflashes twice and offff, press button 2 once while keep holding button 1, the duplicator into BFT

copying mode

3,Press and hold button 1st &2nd of BFT simultaneous (seed code sending mode), LED on duplicator will flflashes twice and offff, release both BFT

buttons and then press any button of BFT, LED on duplicator will flflashes three times then stay on, which indicates BFT copying done.

Remarks: button 1 of duplicator keep pressed from step 2 till 3 done.

remote control Duplicator to send seed code of BFT: Press button 1 & 4 simultaneous.