Universal infrared sensor YET609 for automatic door

Hi all, today I will introduce our best selling YET609 infrared sensor photocell to you.

YET609 photocell is black color /waterproof infrared sensor. It supports AC12v-24v and DC12v-24v. The sensing distance can be about 30 meters indoor or outdoor but there is no glare .If it is outdoor and there is glare but not irradiating directly ,the distance will be about 18 meters. While the range can be reduced to 30% in bad weather conditions for, rain, dust, etc. It is with the function of self-detecting. Rotation through 180 degrees allows the alignment of the photocells irrespective of the way they are fixed to the base.

This photocell can be used for gates and barriers. It is welcomed by customers because the appearance is similar with the Beninca photocell. We use color box as I showed below to pack this photocell. If you don’t want to pack with this box and you like to customize your own box, it is available. White box is also available.

The best installation height should be more than 20cm, and the installation distance should not be less than 2 meters. During installation, the infrared protection device should be placed vertically and on the same horizontal line. LED1 and LED4 are power indicator lights, LED2 is alarm indicator light, and LED3 is signal strength indicator light (LED3 is normally on, it means debugging is completed).

And please note that due to the large transmitting power of this product, there will be no response when the transmitter and receiver are too close. At this time, they should be pulled apart at least 1 meter and tried to install again. When the installation distance is very close, if insensitivity occurs, the condenser lens in the transmitting and receiving can be removed to increase the sensitivity.

Okay, above are the details of YET609 infrared sensor photocell I want to share with you, if you want to get more information, please feel free to contact us.