Product description
YET402WFR-V2.0 (2 channel smart wifi receiver) is 2 channel controller with remote control and WIFI control, which output on/off switch signal. It can control the forward and reverse of motor, on/off switch or the requirement of various special control program. It’s mainly applied to auto door, auto window, lifting equipment, gates, elevators, industrial control and security industries and other fields.
Product features
1.Supporting Wi-Fi intranet or extranet connection: It can be used as a single product or
networking [Multi-product] to be controlled.
2.Supporting Smart Link network technology: Network configuration is simple and
convenient.
3.Wireless 355mhz or 433mhz optional
4.Supporting various remote control on the market, including fixed code(2262, 2260, 2264,
5326, M1E, M5E etc), learning code(1527, 2240, 6P20B, 6P20D etc), rolling
code(HCS301, HCS300, HCS200, HCS201, HCS100, HCS101 etc) and part of brand
remote control(CAME).
5.With high security, large memory, stable performance, low power consumption.
6.Install easily: Plug and play, use easily, safe and reliable.
Product specification
Input voltage:AC/DC9~AC/DC30V
Contact current:<3A
Wireless standard:IEEE802.11b/g/n
Working frequency:2.4G ~2.5G(2400M ~2483.5M)Hz/433/315
Encryption type:WEP/TKIP/AES
Security mechanism:WPA/WPA2
Receiving sensitivity:802.11 b: -91 dbm (11 Mbps);802.11 g: -75 dbm (54 Mbps);433/315 :-112 dbm
Static current:<300mA
Working environment:
Temperature: -40℃~ +80℃;Humidity: 20% ~ 93%
Storage environment:Temperature: -20℃~ +70℃;Humidity: 20% ~ 93%
Capacity:<400
Size:94*60*28.5mm
Product operation
1.Mode Set
This controller has two working modes, momentary(the relay is closed when the key is
pressed, and it release to disconnected) and the latching mode (the state is switched every
time the button is pressed). Mode switch can be set by Dail switch 1 (when Dail switch 2 is
valid in OFF state) or by APP (when Dail switch 2 is valid in ON state).
2.Remote control:
Remote control learning:Press “learning button” on the receiver,or click “learning channel” in the APP “special function setting interface”, .release it until the LED light flickers. When receivers in learning status, press the button of remote control which is used to control that receiver.When LED of receiver flickers 5 times and then lights off, it shows learning successfully. Learning button 1 on the receiver coresponds to relay 1, while learning button 2 coresponds to relay 2.
Control by remote control:This receiver just has momentary function (When press the button, receiver power on,while release it, the receiver power off).
Code clear:Continuously press the learning button on receiver until the LED light off (more than 5s)
Our smart wifi receiver can also controlled by mobile phone,you just need to download and install the APP.
Focus on security technology innovation and lead the development of AI industry. The 17th China I...
On May 11, 2019, our company Yaoertai was founded 14th anniversary! In the past 14 years, we hav...
Saturday, the first week of work in 2019, On a sunny afternoon, Yaoertai, all business colleagues...
The 28th China (Beijing) International Building Decoration and Materials Expo will be held on Mar...
The 15th R + T Asia Shanghai Door and Window Sunshade Exhibition will be held from February 27th ...
The frequency used by the radio remote control is 433Mhz or 315Mhz, also referred to as 433 remot...
The infrared alarm can detect the infrared rays emitted by the human body, and is composed of an ...
Congratulation YET Global Sources Electronics Exhibition bring to a successful close Gate remote ...