With the continuous development of smart technology, many residential communities have begun to implement smart homes. Today, I want to tell you about the retractable door. The retractable door is not only easy to operate, but also greatly saves the use space. It is the first choice for many residential communities and manufacturers. Of course, the control of the retractable door is indispensable for the retractable door controller. Since the retractable door mainly sends the control signal through the infrared light on the retractable door controller, it constitutes a whole. So what is a retractable door controller, how to install it properly and debug it? Let’s look at it together!
Understanding of retractable door controller.
The retractable door controller is a remote control device that uses radio signals to control various remote devices. After these signals are received by the remote receiving device, they can command or drive various other mechanical or electronic devices to perform various operations, such as closing the circuit, moving the handle, starting the motor, and then performing the required operations by these machines. As a kind of remote control supplemented with infrared remote control, it has been widely used in garage door, electric door, gate remote control, burglar alarm, industrial control and wireless smart home.
Installation and debugging method of retractable door controller.
Installation:
1. Pre-buried track.
2. Fixed door body: Put the door body into the track, and the bottom support of the tail is fixed with a special fixing card and a foot expansion screw (M12×80).
3. Limit switch: Embed the limit device according to the opening and closing position of the set door.
4. Fixed control box: The control box can be installed in the head box or moved indoors within 10 meters from the host.
5. Connection line: Connect the corresponding connection line in strict accordance with the wiring diagram (it is strictly prohibited to connect under power supply), the wiring should be firm, the terminal and the terminal should not be short-circuited, and check whether the line is correct.
Commissioning:
Firstly, manually push and pull the door body to check whether the door body is running normally. Only when the door body is running normally, the power can be turned on. When the power is turned on, the power indicator of the control box is on. Press the “On” button, the “On” indicator lights up, and the door can automatically open to the set limit and stop automatically. Press the “Off” button, the “Off” indicator lights up, and the door body can automatically close to the set limit and stop automatically. If the door running limit is found to be inaccurate during the commissioning operation, the height of the limit switch can be adjusted. Debugging and running more than 5 times, if everything is normal, it can be put into use.
I believe that after my explanation, everyone has completely mastered the installation and debugging methods of the retractable door controller. The retractable door controller is easy to use, allowing people to remotely control the door at a long distance, which can greatly reduce human resources. However, when we use the retractable door controller daily, we must also perform reasonable maintenance, so as to effectively extend the service life of the retractable door controller.
The above is about the installation of the retractable door controller and its debugging method, I hope to help friends who need the retractable door controller. Shenzhen Yaoertai Technology has specialized in producing all kinds of retractable door controllers for more than ten years. The retractable door controller has stable performance and has a retractable door remote control and control system. Quality assurance, after-sales have a special person to guide the use, for the need for retractable door controller friends, welcome to consult!
Focus on security technology innovation and lead the development of AI industry. The 17th China I...
On May 11, 2019, our company Yaoertai was founded 14th anniversary! In the past 14 years, we hav...
Saturday, the first week of work in 2019, On a sunny afternoon, Yaoertai, all business colleagues...
The 28th China (Beijing) International Building Decoration and Materials Expo will be held on Mar...
The 15th R + T Asia Shanghai Door and Window Sunshade Exhibition will be held from February 27th ...
The frequency used by the radio remote control is 433Mhz or 315Mhz, also referred to as 433 remot...
The infrared alarm can detect the infrared rays emitted by the human body, and is composed of an ...
Congratulation YET Global Sources Electronics Exhibition bring to a successful close Gate remote ...