Promotional compatible receiver YET402pc-mf-v2.0

Hi all, today I will introduce our YET402pc-mf-v2.0 2 channel wide range voltage compatible receiver to you.

Before introducing product details，I have good news for you.We have very big discounts for this receiver recently ,it is about 15% off promotion,if you are interested in compatible receiver,please dont miss it.

This receiver is a multi frequency product and its frequency range is 300mhz-868mhz. With the 8-bit DIP switch, users can select different brands of remote control channels. And

the brand selection is shown in the instruction,or you can ask us for a reference video.

In RX -Multi receiver, there are 2 independent channels. Each channel has independent button S1, S2 and L1,L2.

The RX -Multi can be worked at the input AC/DC 12V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.

Next I will show you how to enter controller to match remote controls and delete all remote controls.

1. First, choose the right remote control brand to enter through the dial switchwhich you can see as below picture showed.
2. Press the learn button, the LEDturn on. Press the button on the remote, the LED flashes 4 times, this button entry into the RX-Multi successfully .
3. Repeat step 2 for another button.
4. 2 channels in the same brand mode.

Clear all data on the memory card:

Pressing and holding either learn button, the LED start flash. Keep holds pressing this

button until the LED turn off. All data in the memory card will be erased permanently.So please be carefully for erasing all data in the memory card. The data will be erased permanently and cannot be recovered.

Okay, above is the information of YET402pc-mf-v2.0 receiver I want to share with you. If you still have doubts about this products please feel free to contact us.