Automatic curtain leaves shade wireless controller YET848,this is a set of products with remote controller, controller and tubular motor.
YET848 intelligent automatic curtain leaves shade wireless controller has memory the position automatically, pull by hands to control the curtain even when power off , stop in the middle position and so on wireless remote control/pull by hands function.
1. Leaves Shade Receiver YET848;
2. Voltage: 220AC;
3. Frequency: 433.92MHz;
4. Store remotes: 80pcs;
5. Operating range: 10min.
Requirements of remote paired
1. Frequency:433.92MHZ;
2. Chip:HS1527;
3. Button:4 buttons;
4. Button Symbol :A,B,C,D.
1. Pull by hands to control the curtain function.
This automatic door leaves shade wireless controller pull by hands to control curtain not only when power off,but also when power on.when motor stop working,pull the curtain 10cm by hands,motor will operate approach to the direction of pulling the curtain automatically.
2. Memorize the position function.
This automatic door leaves shade wireless controller has the function of memorizing the position function,including position setted by hands and automatically,protector better the motor and conveyor belt not to be damaged caused by mis-operation.
3. Stop in the middle function.
This automatic curtain leaves shade wireless controller not only has function of fully-open/fully-close function,but also has ‘stop in the middle’function,personalized adjust the indoor light. After setting successful,you would press stop button 3 times wherever the position stopped,curtain will stand on the position you setted before.
4. Make the position right function.
This automatic curtain leaves shade wireless controller has the function of making the position right,if you find that curtain don’t stand in the position you want,you would use your hands to let the curtain in the position you want,to improve the state of non open-fully and absolutely close-fully.
Remote Operation:
1. Remote button:
Using 4 button—A B C D,1527 chip remote.
2. Learning way and steps:
1)after pressing the SET button on the bottom of motor,its LED light will go on;
2)press any button of remote,LED light blink slowly three times and light out,indicate learning successful.
3. Delete memory message
Press and hold the SET button 3 seconds till motor LED light go on,release the button,then press and hold the SET button 8 seconds till LED light blink slowly 5 times and go out,indicate delete successful.
Yaoertai Technology is professional designer and qualified manufacturer(factory) of the automatic door control systems with 14 years experience .
1. Can you make customized products and customized packing?
Yes. We made a lot of customized products for our customer before. We can print your logo on our product and also make colorful box for you.
2. Do you have a guarantee of your product quality?( Do your products carry warranty?)
We have a guarantee of one year.
3. Does your transmitter waterproof?
Yes, we have waterproof models, such as YET2126/ YET2133/ YET2132/ YET2128/ YET2117/ YET2129.
4. How to learn a transmitter ?
After receiver enters the learning status, press the same button twice on transmitter, the indicate LED will tell the learning process is finished.
5. How many transmitters max can be learned into the rolling code receiver?
Different model ,different quantity. YET402PC can learn 30pcs learning code transmitters, 6pcs rolling code max, YET402PC-V2.0 can learn 400pcs transmitters max.
6. Why your products are more expensive than other suppliers’ products?
Our cost is depended on our brilliant surface, high quality raw materials, high standard of safety and technology.
Contact Information
Call us : +86-0755-89509951
Mail : szyet@szyet.com
Address : 5th&6th floor block 27, Lianchuang Technical Zone,bulan road, Longgang