banner

Network Surveillance Camera: Analysis of Network Unreachable Reasons

44 Published by xia, Crystal Nov 06,2019

Want create site? Find Free WordPress Themes and plugins.

In the past two days, there have been people in the background who have encountered network unreachability during the installation of the network surveillance camera. How to find the cause of the failure and how to solve it. Today we systematically understand this knowledge.

Smart Waterproof IP Camera.

There are two situations in which a network hard disk camera has a network unreachable fault:

First, the original monitoring system is normal, and then the network unreachable fault occurs;

Second, the network unreachable failure occurred during the initial installation monitoring and debugging process.

First of all, we must understand the reason why the network is unreachable. It is not necessarily a network problem. The simplest network monitoring system consists of front-end cameras, transmission lines, and back-end hard disk recorders. Each part has problems that may cause the network unreachable.

Smart Waterproof IP Camera.

Reason analysis and solution for the first case:

The original monitoring system was used normally, and suddenly there was no image in the middle, indicating that the network was unreachable. That should not be a configuration problem. Find out the problem from the hardware.

Solution: 1 Check the power of the surveillance camera. The normal monitoring power supply is easier than other devices. If the monitoring power supply is not properly powered, the network will be unreachable. 2 Check the crystal head of the network cable, and use the tester to check whether the crystal head is intact. When the crystal head is loose and the network is unreachable, it is enough to re-make a crystal head with the cable clamp.

Reason analysis and solution for the second case:

The initial installation and debugging encountered network unreachability, this problem may be more complicated, because in addition to hardware connection failure, it may be a conflict or error in network IP address configuration.

First of all, it is definitely checking the physical connection, that is, the network cable and the crystal head are in good communication. The initial configuration of the video recorder is normal. Now many video recorders are in the background and need to be activated first. It is definitely not necessary to activate the network.

Then mainly check the IP address of the device, the network IP address. We have mentioned in many previous articles. We need to ensure that the IP address of the network camera and the IP address of the DVR are on the same network segment and cannot be repeated. The meaning of the same network segment, such as 192.168.1.XX, the second-to-last segment of 1 can be understood as the network segment, then 192.168.1.11 and 192.168.1.22 are on the same network segment, and 192.168.1.11 and 192.168.2.22 are different network segment.

At the same time, it should be noted that each has a factory default address, so in the case of multiple cameras, you must set the IP address, try to manually set a fixed static IP address, do not automatically obtain, automatically get the drawbacks when the power is turned off and then restarted, the IP address may conflict with other devices, and the network may be unreachable.

Did you find apk for android? You can find new Free Android Games and apps.

2019 China Shenzhen Public Security Expo!

Focus on security technology innovation and lead the development of AI industry. The 17th China I...

Do you like ? 272

Read more

Celebrate the 14th anniversary of Yaoertai !

On May 11, 2019, our company Yaoertai was founded 14th anniversary! In the past 14 years, we hav...

Do you like ? 471

Read more

2019, let’s go hiking together!

Saturday, the first week of work in 2019, On a sunny afternoon, Yaoertai, all business colleagues...

Do you like ? 1,034

Read more

The 28th Beijing Construction Expo will be held soon, and invite you to participate in the grand event!

The 28th China (Beijing) International Building Decoration and Materials Expo will be held on Mar...

Do you like ? 1,043

Read more

R+T Asia Shanghai Door and Window Sunshade Exhibition, the opening of the 2019 is coming soon

The 15th R + T Asia Shanghai Door and Window Sunshade Exhibition will be held from February 27th ...

Do you like ? 981

Read more

Difference between 433 remote control and 315 remote control and its code method

The frequency used by the radio remote control is 433Mhz or 315Mhz, also referred to as 433 remot...

Do you like ? 3,258

Read more

Infrared alarm principle, function and installation method

The infrared alarm can detect the infrared rays emitted by the human body, and is composed of an ...

Do you like ? 901

Read more

Congratulation YET Global Sources Electronics Exhibition bring to a successful close

Congratulation YET Global Sources Electronics Exhibition bring to a successful close Gate remote ...

Do you like ? 1,002

Read more
YET2018All Rights ReseverdTechnical Support:Baiila