2022 New arrival long range Rolling code remote control transmitter

1.Model No.: YET2195

2.Working Frequency: 433mhz/315mhz

3.Chip type: fixed code/learning code/rolling code/copy code

4.Quantity & Price: 100 pcs,USD1.7 – USD2.4

5.Price Term: EXW

6.Port: Shenzhen

7.Production time: 7 – 15 working days

Fixed code/learning code:

: PT2240

: PT2242

: PT2260

: PT2262/M3E/CT5062

: HT6010/HT6012/HT6014/SH312E

: HT600/HT680/HT6187/HT6270/TT13/PK10T

: AX5026/CT5026/SMC5026

: AX5326/AX5326S

: TT8092

: MC4134/MC1450/SC4134

: SMC918

: EV1527/HS1527/EV527/FP527

: HT6P20D/HT6P20B

Advantage: Copy code: for all fixed code and 18 rolling code

Copy remote controls just by one:

Remain holding button 2 and 3 for more than 2 seconds, the LED flflashes in red (or blue), the duplicator is ready to copy another remote control ;

repeat holding button 2 and 3, the LED flflashes in blue( or red), the duplicator returns to the previous remote control. In a word, use button 2+3 to

switch between two remote controls you copied or want to copy. According to the LED color, red or blue, you can distinguish the remote controls

copied easily.

Memory clearance:

1.Press button 1 and 2 simultaneous until LED flflashes 3 times

2.Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flflashes quickly.

3.Release both button, the duplicator is ready for copying

Put duplicator aside of original transmitter, as close as possible

Fixed code remote control:

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flflashes means the

duplicating succeed.

Repeat above step to the rest buttons. The duplicator will work after duplicating.

Rolling code remote control:

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flflashes means the

duplicating succeed.

Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the

receiver.

Special programming steps for BFT MITTO2 & MITTO4 (old version)

1, memory clearance

2, Press and hold button 1 of duplicator till LED flflashes twice and offff, press button 2 once while keep holding button 1, the duplicator into BFT

copying mode

3,Press and hold button 1st &2nd of BFT simultaneous (seed code sending mode), LED on duplicator will flflashes twice and offff, release both BFT

buttons and then press any button of BFT, LED on duplicator will flflashes three times then stay on, which indicates BFT copying done.

Remarks: button 1 of duplicator keep pressed from step 2 till 3 done.

Duplicator to send seed code of BFT: Press button 1 & 4 simultaneous.

Resume:

If you erase the code by mistake, you can resume it by pressing and hold both of the “3” and “4” button on the remote controllers at the same time, after 10 seconds, the LED flflashes 2 times and turn offff which indicates the code of the copy remote controller is resumed.

Remarks:

For fifixed code &learning code remote controls, the duplicator will work after duplicating.

But for the rolling code brand listed above, please follow the original manual to program the duplicator to receiver after duplicating

YET new arrivals
New upgrade, new appearance, with screen display, multi-brand copy