How to match electric door wireless remote control 433/315 ?

With electric door wireless remote control, we must know the following points: First, you must have a good electric door wireless remote control. Second, you need to know the crystal frequency and chip model of your electric door wireless remote control. Third,this electric door wireless remote control device is mainly suitable for rolling doors, telescopic doors, gates, garage doors, etc. The following explains how to match the electric shutter door,rolling door,telescopic door,and garage door remote control 433/315.

Before using the remote control, make sure that the original remote control is working properly. Also be aware of the launch frequency and chip model of the remote control.If you don’t know the transmission frequency of the remote control? Please take apart your remote control.

Refer to the steps below for specific operations:

First Step: Clear Code

Simultaneously press the remote control to turn on and off (the upper row). When the two buttons are flashed once, the flashing is about 2 seconds and the flashing is successful. After clearing, the four button indicators on the remote control flash only once and go out.

The Second Step:Copy

Place the original remote control side by side with the copy remote control (preferably take the quick copy remote control in the right hand), and press any of the two remote control buttons at the same time. If the flashing remote control indicator flashes quickly, the copy is successful. It can be copied successfully in only 1 second. In the same way, copy the other three button pairs.

The Third Step:Recovery (usually not used)

If the useful code is cleared by mistake, you can press the remote control to turn on and off the two buttons at the same time without re-copying the other remote controllers. After two seconds, the indicator flashes quickly and the recovery is successful.

Introducing a metal copy type 433 electric door wireless remote control YET019

1. Product size: 65.11 × 35.5 × 15.07mm;

2. Working voltage: 12V (23A);

3. Working current: ≤12mA;

4. Working frequency: 315MHz, 433MHz (optional) special frequency can be customized;

5. Transmitting power: 10-15mw;

6. Launch distance: 100 meters (open space);

7. Frequency deviation: ±0.2MHz;

8. Transmission rate: 50-60KHZ;

9. Oscillation resistance: according to customer requirements;

10. Coding chip:

Learning code HS1527, EV1527, HT6P20B, etc.

Fixed code HS2260, HS2262, PT2264SC2262, etc.

Rolling code HCS301, HCS300, HCS200, etc.

Copy:Function with copy remote control that can be used alone.

11. Number of buttons: two buttons, four buttons are optional;

12. Shell color: black, silver metal frame;

13. Scope: Metal copy type 433 electric door wireless remote control YET019 is widely used in various door and window controllers and other industrial controls, anti-theft alarm, smart home.

The above is related to the knowledge of the electric door wireless remote control 433/315. Shenzhen Yaoertai Technological?Development Co., Ltd., more than 10 years focus on wireless remote control, wireless remote control switch, wireless transceiver module, wireless controller, infrared detector, anti-theft alarm, smart lock, smoke detector and other security alarm and smart home control products.The one-stop production supplier of design, development, production and sales.The company’s smart products can be widely used in electric screens, electric drying racks, electric windows and doors, smart home control, smart home security, retractable doors, garage doors , remote control lights, remote control switches, communications and security and other fields. Professional supporting garage door factory, GPS factory, security factory, electric control lock factory, automobile factory, electric door and window, gateway, industrial control, etc. Welcome everyone to come to consult!