DC12v/DC24v 1 channel open code RF receiver

DC12v/DC24v 1 channel open code RF receiver

Hi everyone，today I want to share our 1 channel receiver YET401pc-dm to you.

This receiver supports 12v or 24v. You can choose the voltage by a contact pin，it will be 12v if contact pin inserted ,and it wil be 24v if contact pin unplug.

Comparing with other model 1 channel receiver，the advantage of this YET401pc-dm is it can identify fixed code which are with 2262、2260、2264、5326、M1E、M5E chip and so on,

learning code which are with 1527、2240、6P20B、6P20D chip and so on）,

rolling code with HCS301、HCS300、HCS200、HCS201、HCS100、HCS101 chip etc.

It also can work with some brands remote control，for example CAME remote control. So no need to worry about the chip of your original remote control. Or you can test

The methods and steps for learning and clearing code is very simple for YET401pc-dm receiver.

You only need to press “Learning” button on the receiver, release it until LED light flickers, then the receiver will enter learning status (LED goes out this moment).You should press related button on remote control to monitor this receiver when it is in learning status. When LED on Receiver flickers 5 times and then goes out, it indicates Learning has been done. It can response to up to 30 Remote control of this mode.

If Remote control is lost and wanting to make it invalid totally, just need to press “Learning” butt

on (more than 8s) until LED goes out, then Receiver will eliminate all contents automatically. If want to reuse it, just learning one more time again.

Okay above are the details of YET401pc-dm I want to share with you,If you have demand for 1 channel receiver, please don’t miss this product!

Know more, please click here!http://www.szyet.en.alibaba.com