The active infrared radiation detector consists of two parts: receiving and transmitting. The infrared emitter emits infrared light to a receiver installed at a few meters or even hundreds of meters away, and its beam has a single beam, a double beam, or even multiple beams. When the corresponding infrared beam is interrupted, the receiver sends an alarm signal. The receiver is composed of an optical lens, an infrared phototube, an amplification shaping circuit, a power driver and an actuator. The working principle is that the receiver can receive the infrared beam as a normal state, and when an intrusion occurs, the infrared beam emitted by the transmitter is blocked, that is, the phototube receives no infrared light, thereby outputting a corresponding alarm electric signal, and After the shaping is amplified, the switch quantity alarm signal is output, and the alarm signal can be received by the alarm controller, and the linkage actuator is activated to start other alarm devices, such as an audible and visual alarm, an analog electronic map, a television monitoring system, a lighting system, and the like.
YET610 new active infrared radiation detector
Receiver parameters: ≤20M
Scope: When bad weather such as heavy rain or fog, the distance will be reduced by 30%
Infrared emission frequency: 1.92Khz
Input power: DC or AC 12-24
Input current: RX 15mA-TX 30 mA
Angle of incidence: <±10o
Operating environment: -20 ° C ~ 70 ° C
Maximum load: 1A max 30V
Active infrared radiation detector size: 100×35×40MM
Infrared radiation detectors are mainly used in buildings such as fences and buildings with relatively long distances. Compared with infrared radiation barriers, they are more resistant to rain, dust and interference, and are mainly used in home security systems. In the villa and in the single house. Common active infrared radiation detectors have two beams, three beams, and four beams. The distance ranges from 30 meters to 300 meters. Some manufacturers also produce long-distance multi-beam “light walls”, which are mainly used in factories and mines and some special places.In home applications, we use up to 100 meters of products. In this distance, infrared fences and infrared radiation detectors can be used: if it is installed with balconies, windows, aisles, etc., use infrared fences; When installed in a building, a courtyard wall, etc., an infrared radiation detector should be used; when selecting a product, only products larger than the actual detection distance can be selected.
Infrared radiation development trend
1. More stable and reliable: Enhance the ability of the detector to resist RFI or EMI, lightning protection, etc., to adapt to harsh environments;
2. More kinds of functions: such as detector frequency, anti-blocking, anti-spray cover, anti-destruction, etc.;
3. More beautiful, compact appearance: in line with the increasing demand for taste.
Yaoertai?Technological Development?Co., Ltd. specializes in the development and production of infrared alarms, infrared radiation detector, burglar alarms, infrared burglar alarms and other security and communication equipment, advanced technology and quality assurance!
The 9th Guangzhou Shading Window-Door Exhibition will be held at the Guangzhou International Proc...
On May 11, 2019, our company Yaoertai was founded 14th anniversary! In the past 14 years, we hav...
Saturday, the first week of work in 2019, On a sunny afternoon, Yaoertai, all business colleagues...
The 28th China (Beijing) International Building Decoration and Materials Expo will be held on Mar...
The 15th R + T Asia Shanghai Door and Window Sunshade Exhibition will be held from February 27th ...
The frequency used by the radio remote control is 433Mhz or 315Mhz, also referred to as 433 remot...
The infrared alarm can detect the infrared rays emitted by the human body, and is composed of an ...
Congratulation YET Global Sources Electronics Exhibition bring to a successful close Gate remote ...