DC12V-24V open code YET402pc-v3.0 receiver

Hi everyone，I will introduce our hot selling receiver to you today.

YET402pc-v3.0 receiver is a remote controller module with two independently operated

dry contacts relays.Its power supply is DC12v-24V.It can store up to 400pcs remote control.

YET402pc-v3.0 receiver There are 2 working modes for this control module.

Pulse Mode-The relay switches ON by pressing a button on the remote control and will remain ON until button is released.

Latch Mode – The relay switches ON by pressing a button on the remote control and turns OFF when the button is pressed again.

Next let me introduce the method to program working mode.

For programming of Pulse Mode

– Power up the MDU module – Power LED will turn ON.

– Press once Button S1 for programming Relay 1 or Button S2 for programming Relay 2. The Learn LED will light up.

-Press and hold a button on the remote control until the Learn LED flashes five times.

For Programming of Latch Mode

– Power up the MDU module – Power LED will turn ON.

– Press twice Button S1 for programming Relay 1 or Button S2 for programming

Relay 2. The Learn LED will light up.

Press and hold a button on the remote control until the Learn LED flashes five times.

And please note that each button of the remote key fob could be programmed independently.

Erasing a remote control from the control module is performed by resetting the MDU module and adding the operating remote controls back to the module.

To reset the module:

– Press Button S1 or Button S2 on the control module and hold until the Learn LED

lights off. By doing this, all remote

controls stored in the module will be erased.

To add remote controls:

– Follow the steps above (section: Programming operating modes)

Ok above are the details of this receiver I want to share with you.And if you have other requests, our strong and experienced R&D team can help you achieve it ,so don’t hesitate to send us an inquiry.