Upgraded wifi to remote RF converter YET6956WFR-V4.0

Hi everyone, good news！Our research and development team upgraded the wifi to remote RF converter. Now YET6956WFR-V4.0 is a Wi-Fi/Bluetooth remote control signal transponder. It not only supports Wifi, but also supports Bluetooth. You can use your mobile phone to control the door of your house even in the places with poor signal.

This converter is with all the functions of YET6956WFR-V3.0，the only difference is the addition of Bluetooth communication mode. The default communication mode is WIFI while you can switch the communication mode independently according to the different use environment (the following picture is the screenshot of Bluetooth communication mode).

1. In the case of network and stable network signal, it is recommended to use WIFI communication;
2. In no network or network unstable environment, it is recommended to use Bluetooth communication.

After above steps, please follow below steps to add remote control:

click Add Remote Control- > Enter remote controller name – > select remote control brands (some remote control brands need to set frequency, oscillation resistance, address bit encoding) – > click next.

If your remote control is custom one ,please Click Add remote control-> Enter remote control name -> Select Custom (When the RF converter rings once, please press and hold any button on the remote control and close to the RF converter until the RF converter rings three times, which indicating the remote control is successfully added. If the RF converter makes a long beep, the remote control copy failed.) -> click Next .( If the fixed code and the learning code remote control are required, repeat the above steps to add the required

buttons one by one.)

After the remote control is created successfully, the Converter needs to learn with the controlled device. The Converter learning is same as the original remote control. For example, the controller and the original remote control use a single button to learn(match), then the Converter match controller by a single button too, otherwise the combination button is used for learning.

Okay, above are some details of our upgraded YET6956WFR-V4.0 wifi to remote RF converter I want to share with you, if you are interested in this product please send us inquiry or contact us freely.