YET2129 colorful universal high quality remote control duplicator

YET2129 remote control, 433mhz and 315mhz for optional, 6volts and there are 5 colors for your choice,
they are red,yellow,blue,green and black.

We call this type remote control D4 type duplicator, D4 type duplicator means the duplicator can copy Fixed code & learning code and eighteen brands rolling code remote control like BFT, Nice, Doorhan and so on.For more brands ,you can find them on the list of the instruction. This instruction will come together with the product when you place an order.

The way of copy

1.Memory clearance

Step 1.Press button 1 and 2 at the same time until LED flashes 3 times

Step 2. Release button 2 (But pls keep in mind you should continue pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly.

Step 3. Release both buttons,

Now the duplicator is ready for copying

2.Duplicating

When duplicating, please remember to put duplicator aside of original remote control, as close as possible.

（1）For fixed code remote control:

You should press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes, which means the duplicating succeed.

Then you should repeat above step to the rest buttons. And the duplicator will work after duplicating.

(2)For rolling code remote control:

Please press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes.LED light flashing means the duplicating succeed.

Once 1 button duplicated, the rest buttons will generate automatically, no need extra operation .And then please follow original receiver manual to insert the new duplicator on the receiver.

3.Resume

If you erase the code by mistake, you can resume it by pressing and holding both of the “3” and “4” button on the remote control at the same time, after 10 seconds, the LED flashes 2 times and turn off which indicates the code of the copy remote control is resumed.

Remark:

For fixed code &learning code remote controls, the duplicator will work after duplicating.

But for the rolling code brand listed above, please follow the original manual to program the duplicator to receiver after duplicating. Otherwise it wont work even though you have duplicated successfully.